USB Interface Module
Category: USB Interface Module
Tags: RAMPS, SD Card, Micro SD Card, Memory Interfacing
Micro SD card adapter for RAMPS
Approx Restocking Date: 25 to 30 DaysSKU: 51912- SPI mode.
- Supply voltage: 4.5 – 5.5V.
- Up to 50 MB / sec data transfer rate.
- Located directly on a RAMPS.
- Also, be used with other microcontrollers.
- Dimensions: 27 x 17 x 11 mm(LxWxH).
- Weight: 5 gm.
Tags: RAMPS, SD Card, Micro SD Card, Memory Interfacing
Availability:
Out of stock
₹ 229.00 (Incl. GST)
Out of stock
Ever wanted to run from the SD card to your RepRap? Here is your chance! This Micro SD card adapter for RAMPS allows you to print on Ramps from MicroSD To Ramps1.3 and later, it is easy to connect to the Ramps on.
3D Printers Ramps MicroSD Card Adapter Supporting Standard Size RAMPS 1.4.
Note: This module is available in two different colors as shown in images and they are shipped randomly.
Features :
- SPI mode.
- Up to 50 MB / sec data transfer rate.
- Located directly on a RAMPS.
- Also, be used with other microcontrollers.
Package Includes :
1 x Micro SD card adapter for RAMPS.
| Operating Voltage (V) | 4.5 to 5.5 |
|---|---|
| Dimensions (L x W x H) mm | 27 x 17 x 11 |
| Weight (g): | 5 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 4 × 3 × 3 cm |
Based on 0 reviews
Be the first to review “Micro SD card adapter for RAMPS”
Related products
-
3D Printer Display and Controller
3D printer 128×64 Smart LCD controller for ramps 1.4
SKU: 12072- RAMPS 1.4 LCD 12864 intelligent controller.
- With an SD card base on back.
- Large screen display 128×64 LCD (3.2″)
- SD card slot at the back, able to directly select a file and print
- The product comes encoder parameter adjustment can be achieved, and the file selection print
- Plug & play on the RAMPS, but need to modify the firmware to support.
- LCD 12864 Smart Controller fully supported by Marlin Firmware.
SKU: 12072 -
USB Interface Module
RS232 to TTL Serial Interface Module
SKU: 31154- IC Chip: MAX3232
- Operating Voltage: 3.3-5.5V
- It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU
- Pre-assembled compact size board
- Suitable for use with most microcontrollers
- Operates up to 250 kbit/s
SKU: 31154 -
USB Interface Module
SD Card Reading Writing Module for Arduino
SKU: 44160- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
- Size:4.7 x 3.1 cm.
- LED indicator.
- SD Card Holder.
- Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
SKU: 44160 -
USB Interface Module
DB9 Female Screw Terminal to RS232 RS485 Conversion Board
SKU: 44051- Brings all 9 pins of a DB9 connector to screw terminal blocks
- Adapter used for communication debug
- 9 pcs signal line was all lead out, name and number clearly labeled;
- All-copper DR9 seat, anti-oxidation, better contact;
- Military board, three anti-paint sprays an entire board, corrosion-resistant;
- Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
- Use of environmentally friendly copper terminals, through IS0-9001.
SKU: 44051 -
USB Interface Module
USB To Serial Adapter Module USB TO TTL RS232 Arduino Cable With CTS RTS
SKU: 43433- The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD’s.
- UART interface IC device which handles all the USB signaling and protocols. The cables provide a fast, simple way to connect.
- Devices with a TTL level serial interface to USB.
- Each TTL-232R cable contains a small internal electronic circuit board, utilizing the FT232R, which is encapsulated into the USB.
- the connector end of the cable. The other end of the cable comes with a selection of different connectors supporting various applications.
- The USB side of the cable is USB powered and USB 2.0 full speed compatible.
- Each cable is 1.0m long and supports a data transfer rate up to 3 M baud.
SKU: 43433
There are no reviews yet.