Breakout Board PS2 Connector
SKU: 7441- PS2 Connector breakout board
- Connectors pre-soldered
- Compatible with Lynxmotion PS2 V3 wireless controller
- Holes compatible with Arduino and Lynxmotion Electronics
- Dimensions: 45 x 22x 22 (L x W x H) mm
- Weight: 12gm
Tags: Cytron, PS2 wired Remote, PS2, PS2 Connector, PS2 Female Connector
In stock
₹ 249.00 (Incl. GST)
In stock
Breakout Board PS2 Connector is intended to be used with the PlayStation 2 DualShock 2 Controller Remote. The pins are broken out one to one. Break-away tabs allow you to mount the board to the controller remote electronics (same hole spacing), while the other two holes allow you to mount the board to a normal Arduino.
On this Breakout Board PS2 Connector and 90-degree headers are pre-soldered. Pins are broken out to 0.1" for easy mounting on breadboard or donut board.
Also, if you are interested in buying the PS2 Controller Remote, then click on the name below
PlayStation 2 DualShock 2 Controller Remote
Features :
- PS2 Connector breakout board
- Connectors pre-soldered
- Compatible with Lynxmotion PS2 V3 wireless controller
- Holes compatible with Arduino and Lynxmotion Electronics
- Mounting hardware included
Package Includes
1 x Breakout Board PS2 Connector
| Item Type: | Breakout Board, PS2 Connector |
|---|---|
| Length (mm): | 45 |
| Width (mm): | 22 |
| Height (mm): | 22 |
| Weight (g): | 12 |
| Shipping Weight | 0.016 kg |
| Shipping Dimensions | 7 × 5 × 2 cm |
Based on 1 review
Add a review
You may also like…
-
Shield for Arduino
PS2 Controller Starter Kit
SKU: 7438- Stable 5V powered, low current consumption, less than 150mA.
- 1 standard PS2 controller socket.
- Communicate with host microcontroller through 5V TTL UART.
- Simple inquiry command and button status feedback for the host process.
- Vibrator motor is controllable.
- Wired or wireless PS2 controller is fully compatible.
- A small LED as the indicator for communication between SKPS and PS2 controller.
SKU: 7438 -
Cytron Motor Drivers
Cytron Arduino PS2 Shield
SKU: 2506- 5V powered low current consumption.
- Simple to use UART protocol
- Vibrator motor on PS2 is controllable.
- Wired and Wireless PS2 controller is supported.
- PS2 Controller will automatically operate in analog mode.
- A status LED
- Jumper selector to select different UART Baud Rate (9600, 57600, 115200).
- Jumper selectors to select different digital pin as UART TX and RX pin.
SKU: 2506 -
Related products
-
PIC Programmer
ICSP Universal Socket
SKU: 10061ICSP Universal Socket/ICSP Adapter
To ease user, Cytron has created this UIC-A so that user can use any programmer regardless of the development board. For example, a development board which uses PICkit2’s socket standard, which is 6-way header pins can be programmed with UIC000B by using the UIC-A!
SKU: 10061 -
PIC Development board
28 Pins PIC Start Up Kit - SK28A
SKU: 10080-
Industrial grade PCB.
-
Every board is being tested before it is shipped out.
-
Compact platform and breadboard-friendly
-
Suitable for hobbyists and expert.
-
Save development and soldering time.
-
Turn pin for crystal comes with 20MHz Crystal by default, the user may use crystal at various frequencies
-
Mini USB socket on board may use PIC18F2550 for USB device development, example USB Bootloader.
-
2×8 Character Parallel LCD pad ready (optional).
SKU: 10080 -
-
Cytron Motor Drivers
Cytron FD04A 4-Channel Motor Driver
SKU: 16010- Industrial grade PCB.
- Vmotor: 7 V to 25 V DC.
- Each component is soldered properly and tested.
- Able to drive 4 DC motor at 2.5A (peak), 1.5A continuously.
- 2 LEDs as a direction indicator for each motor.
- 1 LED as a power indicator.
- A pluggable connector for more user-friendly design.
- Fully compatible with Cytron DIY project, Flexibot – Using Transwheel (PR19).
SKU: 16010 -
Cytron Motor Drivers
Cytron Enhanced 13Amp DC Motor Driver 30A peak (10 seconds) MD10C
SKU: 2777- Bi-directional control for 1 brushed DC motor, single channel
- Support motor voltage ranges from 5V to 30V.
- Maximum current up to 13A continuous and 30A peak (10 seconds).
- 3.3V and 5V logic level input.
- Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: 2777 -
PIC Development board
40 Pins dsPIC Start Up Kit - SKDS40A
SKU: 10086-
ICSP connector for UIC00A /B-simple and fast method to load program.
-
Perfectly fit for 40 pins dsPIC (16-bit), NOT for the 40-pins 8-bit PIC.
-
2 x programmable switch.
-
2 x programmable LED indicator.
-
Changeable Crystal – default 10MHz.
-
Existing pad for 16 x 2 characters LCD display.
SKU: 10086 -
Raj –
Good Product
Raj –