ELECROW is a leading provider of cutting-edge electronics and educational tools, catering to the needs of makers, educators, and tech enthusiasts. The company offers a diverse range of high-quality products, including development boards, sensors, 3D printing accessories, and DIY kits. With a strong commitment to empowering creativity and learning, ELECROW supports a wide range of projects, from beginner-friendly kits to advanced solutions for seasoned professionals.
At Robu the goal is to foster a vibrant community where ideas come to life through technology. Whether you’re starting your first project or looking to expand your skills, ELECROW provides the tools and resources you need to bring your ideas to life.
ELECROW
Showing 1–48 of 88 results
-
Water TDS, pH, Flow, Level Sensor
ELECROW Crowtail- PH Sensor
SKU: 1855118- Model: ELECROW Crowtail- PH Sensor
- The PH sensor can be used to test the PH value of the aqueous solution.
- which can be widely used in environmental monitoring, the chemical industry, and so on.
- Range of measurement: 0-14 pH
- Measuring temperature: 0-60℃
- Response time: less than 2min
- Working voltage: 5v
SKU: 1855118 -
HMI LCD Display
ELECROW ESP32 display 7.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
HMI LCD DisplayELECROW ESP32 display 7.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
SKU: 1855142- Model: ELECROW ESP32 display-7.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
- 7.0 LCD-TFT Capacitive HMI touch display module
- 800+480 screen resolution Capacitive Touch
- Color Depth 16M Frequency up to 240 MHz
- 512KB SRAM
- 4 MB Flash memory
- 2*UARTO,1*GPIO,1*Battery interface
SKU: 1855142 -
-
Sensor ICs
ELECROW Crowtail- DWM1000 UWB(Ultra Wide Band) Indoor Positioning module
SKU: 1855109- Model: ELECROW Crowtail- DWM1000 UWB(Ultra Wide Band) Indoor Positioning module
- Integrated DW1000 chip, 4 channels with working frequency from 3.5 GHz to 6.5 GHz
- STM32F103 main control chip, simple integration, no RF design required
- Support two-way ranging and TDOA
- Support serial communication
- Supports IEEE 802.15.4-2011
SKU: 1855109 -
Raspberry Pi Hats
ELECROW Crowtail shield for Raspberry Pi Pico (RP2040)
SKU: 1855107- Model: ELECROW Crowtail shield for Raspberry Pi Pico (RP2040)
Crowtail GPIO Expansion Board for Pico: Separate the pins and power supply of the board, providing 10 additional Crowtail ports - Rich Peripherals for Crowtail: Provides 10 Crowtail ports, including 2 I2C, 2 UART, 3 digital, 3 analogs, 1 SPI port, 1 power switch, 1 BAT interface, and SWD debugging interface.
- No soldering required, plug and play: support direct connection to Crowtail sensors
- Platform support: MicroPython & Arduino
SKU: 1855107 - Model: ELECROW Crowtail shield for Raspberry Pi Pico (RP2040)
-
HMI LCD Display
ELECROW ESP32 display-4.3 Inch HMI Display 480×272 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
HMI LCD DisplayELECROW ESP32 display-4.3 Inch HMI Display 480×272 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
SKU: 1855140- Model: ELECROW ESP32 display-4.3 Inch HMI Display 480×272 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
- dual-core 32-bit LX6 microprocessor
- built-in wireless communication 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5.0.
- LCD 480 x 272 4.3 inches TFT-LCD
- Applications: Automotive, Medical, Industrial, and IoT applications.
SKU: 1855140 -
HMI LCD Display
ELECROW ESP32 display-5.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
HMI LCD DisplayELECROW ESP32 display-5.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
SKU: 1855141- Model: ELECROW ESP32 display-5.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
- 5.0° LCD-TFT Capacitive HMI touch display module
- 800*480 screen resolution
- Color Depth 16M
- Capacitive Touch
- Frequency up to 240 MHz
- 512KB SRAM
- 4 MB Flash memory
- 2*UARTO, 1 *GP10,1 *Battery interface
SKU: 1855141 -
-
-
HMI LCD Display
ELECROW ESP32 display-3.5 Inch HMI Display 320×480 SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
HMI LCD DisplayELECROW ESP32 display-3.5 Inch HMI Display 320×480 SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
SKU: 1855138- Model: ELECROW ESP32 display-3.5 Inch HMI Display 320×480 SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case.
- LCD 320 x 480 3.5 inches.
- TFT-LCD with driver IC ILI9488.
- Rich peripheral interfaces.
- integrated WiFi and Bluetooth.
SKU: 1855138 -
-
HMI LCD Display
ELECROW ESP32 display-2.8 Inch HMI 240×320 Display SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/Esphome- Homeassistant/PlatformIO /Micropython Without Acrylic Case
HMI LCD DisplayELECROW ESP32 display-2.8 Inch HMI 240×320 Display SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/Esphome- Homeassistant/PlatformIO /Micropython Without Acrylic Case
SKU: 1855137Model:ELECROW ESP32 display-2.8 Inch HMI 240×320 Display SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/Esphome- Homeassistant/PlatformIO /Micropython Without Acrylic Case
Processor:ESP32-WROOM-32-N4
Resolution:240 x 320SKU: 1855137 -
TFT LCD Displays
ELECROW ESP32 Terminal–with ESP32 3.5 inch parallel 480×320 TFT capacitive touch RGB display(RGB by chip ILI9488)
TFT LCD DisplaysELECROW ESP32 Terminal–with ESP32 3.5 inch parallel 480×320 TFT capacitive touch RGB display(RGB by chip ILI9488)
SKU: 1855135- Model: NTL-ELECROW ESP32 Terminal–with ESP32 3.5 inch parallel 480×320 TFT capacitive touch RGB display(RGB by chip ILI9488)
- ESP32-S3 module with 16MB Flash and 8 MB PSRAM.
- Wi-Fi Protocol: 802.11b/g/n (802.11n up to 150Mbps).
- Bluetooth 5 support for wireless connectivity.
- 3.5-inch TFT LCD with 320*480 resolution and capacitive touch panel.
- Supports Arduino, LVGL, PlatformIO, and Micropython for development.
- Onboard charging chip and TYPE-C interface for easy charging.
- 4 Crowtail interfaces (HY2.0-4P connector) for versatile sensor connections.
SKU: 1855135 -
-
GPS Modules
ELECROW Crowtail-4G SIM A7670E Module GPS Breakout Board support GPS/GLONASS/BDS
SKU: 1855130- Model: ELECROW Crowtail-4G SIM A7670E Module GPS Breakout Board support GPS/GLONASS/BDS
- LTE Cat1 wireless module (SIM A7670E) for 4G data and voice communication
- Supports multiple LTE bands (B1/B3/B5/B7/B8/B20), WCDMA, and GSM networks
- Protocols include TCP/IP, FTP, HTTP, and satellite navigation systems (GPS/GLONASS/BDS)
- Features a charging interface and a 3.5mm headphone jack for phone calls.
SKU: 1855130 -
-
-
OLED Display
ELECROW 0.42inch Tiny OLED Display 4 pin Screen Module with SSD1306 Driver and IIC Interface
OLED DisplayELECROW 0.42inch Tiny OLED Display 4 pin Screen Module with SSD1306 Driver and IIC Interface
SKU: R164023- Output Type: Red line or cross beam.
- Wavelength: Commonly around 650nm (red).
- Input Voltage: Usually 3V to 5V.
- Adjustable Focus: Focus intensity can be modified.
- Durable Design: Portable and easy to install.
SKU: R164023 -
LORA Module
ELECROW Crowtail- Lora RA- 08H/LoRaWAN Module for Long Range Communication (803- 930Mhz）
SKU: 1855114- Model: ELECROW Crowtail- Lora RA- 08H/LoRaWAN Module for Long Range Communication (803- 930Mhz）
- High sensitivity: -138dBm @125Kz SF12
- Support LoRa/(G)FSK/BPSK/(G)MSK modulation
- Support multiple sleep modes: depth sleep current is low to 0.9uA
- Support spread spectrum factor: SF5/SF6/SF7/SF8/SF9/SF10/SF11/SF12
SKU: 1855114 -
Development Boards
ELECROW ESP32 Serial Port to Ethernet Module WT32-ETH01 Development Board Module
SKU: R164025- Support TCP/IP protocol stack:Integrated TCP/IP protocol stack, easy for users to complete the networking function of embedded devices;
- Multiple working modes:Compatible with half-pad and connector through-hole design to meet the needs of different application scenarios;
- Efficient and stable:Integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, more powerful and reliable performance;
- Ultra-low power consumption:Ultra-low power consumption, suitable for power-sensitive application scenarios.
SKU: R164025 -
TFT LCD Displays
ELECROW ESP32 Terminal- 3.5 inch 480×320 SPI TFT capacitive touch display with OV2640 camera
TFT LCD DisplaysELECROW ESP32 Terminal- 3.5 inch 480×320 SPI TFT capacitive touch display with OV2640 camera
SKU: 1855134- Integrated ESP32-S3 module, which supports 2.4 GHz Wi-Fi and Bluetooth 5 (LE)
- 5-inch TFT 320*480 resolution touch LCD display
- Support, USB, UART, SPI, I2C, PWM, and I2S communication protocols
- Supports 1T1R mode, data rate up to 150 Mbps, Wireless Multimedia (WMM)
- Compatible with Arduino/Micropython
SKU: 1855134 -
Development Boards
ELECROW ESP32-C3 Mini development board ESP32 development board with Wi-Fi and Bluetooth
Development BoardsELECROW ESP32-C3 Mini development board ESP32 development board with Wi-Fi and Bluetooth
SKU: R164024- ESP32-C3:Ultra-low power SoC with RISC-V 32-bit single-core processor, with a main frequency of up to 160MHz;
- Wireless support:Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5；
- Ultra-small size:2*26.1mm mini size, easy to integrate into the project；
- Rich interfaces:With 11 GPIO interfaces, 2 UART interfaces, etc., it is easy to develop and expand.
SKU: R164024 -
Educational Kits
Elecrow Crowtail-Starter Kit for Micro:bit No Mainboard
SKU: R101635- Plug-and-play with various Crowtail modules, no soldering or complex wiring required.
- Includes over 20 clear and step-by-step tutorials for using Micro:bit and sensors.
- Enables endless creative possibilities and fun projects with Micro:bit.
SKU: R101635 -
-
-
-
HMI LCD Display
Elecrow 10.1 inch Display IPS 1280×800 Acrylic Case Touch Screen Compatible with Raspberry Pi Jetson Nano PC raspberry Pi Boards
HMI LCD DisplayElecrow 10.1 inch Display IPS 1280×800 Acrylic Case Touch Screen Compatible with Raspberry Pi Jetson Nano PC raspberry Pi Boards
SKU: R101639- Screen Size: 10.1 inches
- Screen Type: IPS
- Resolution: 1280 x 800
- Touch Screen Type: Capacitive
- Touch IC: SIS9200
- Power Input: MicroUSB (5V)
SKU: R101639 -
RTC Module
ELECROW RTC Data Logger Shield
SKU: 1855145- Model: ELECROW RTC Data Logger Shield
- The RTC Data Logger shield adds storage to your Arduino project.
- It supports SD, SDHC, or MicroSD TF cards and with an RTC onboard.
- Use the on-board toggle switch to select the SD card type.
- when you want to plug an SD card into it, you should select the switch in the right direction.
SKU: 1855145 -
Shield for Arduino
ELECROW ELE Can-Bus Shield-V1.5
SKU: 1855133- Model: ELECROW ELE Can-Bus Shield-V1.5
- CAN-BUS is a common industrial bus
- long travel distance
- Medium communication speed and high reliability
- Widely used as the automotive diagnostic bus
- Also commonly used on modern machine tools
SKU: 1855133 -
HMI LCD Display
Elecrow RC070 7 inch 1024*600 LCD Display with Touch Screen Without Acrylic Case
SKU: R101641- Appearance Size: 16412414.4mm
- Screen Size: 155*88.5mm
- Resolution: 1024×600
- Touch Screen: Capacitive touch screen
- Compatibility: Raspberry Pi (Raspbian, Ubuntu), Windows 10/8.1/8/7, BB Black, BeagleBone
SKU: R101641 -
-
-
Official Raspberry Pi Kits
Elecrow Crowtail Starter Kit for Raspberry Pi
SKU: R101636- Module Count: Over 22 electronic modules included in the kit.
- Connector Type: Standard 4-pin connectors for easy integration with the Crowtail-Base Shield.
- Tutorials: Includes 20 detailed tutorials aimed at facilitating quick learning and project development.
SKU: R101636 -
HMI LCD Display
Elecrow CrowVision 11.6” Raspberry Pi Capacitive Touch Display HD 1366*768 IPS Screen for RPI LattePanda/Beaglebone/Jetson Nano, etc
HMI LCD DisplayElecrow CrowVision 11.6” Raspberry Pi Capacitive Touch Display HD 1366*768 IPS Screen for RPI LattePanda/Beaglebone/Jetson Nano, etc
SKU: R101638- Touch Type: 5-point Capacitive Touch
- Resolution: 1366*768
- Color Depth: 16M
- Viewing angle: 178°Wide Viewing Angle
- Display Type: IPS Panel
- Screen Type: TFT-LCD
- External power supply: 12V-2A
SKU: R101638 -
