LILYGO is a leading innovator in IoT and electronics, specializing in cutting-edge development boards and smart modules. Renowned for their versatility and performance, LILYGO products empower makers, engineers, and enthusiasts to create advanced solutions effortlessly. From ESP32-based boards to E-Paper displays, our diverse range caters to all project needs.
With a commitment to quality and innovation, LILYGO continually pushes the boundaries of technology, ensuring users have the tools they need for success. Explore our extensive catalog and join a community of creators transforming ideas into reality with LILYGO’s reliable, high-performance hardware. Your next great invention starts here.
LILYGO
Showing 1–48 of 67 results
-
-
GSM GPRS and GNSS Modules
LILYGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800H Module Unsoldered
GSM GPRS and GNSS ModulesLILYGO T-Call V1.4 ESP32 Wireless Module SIM Antenna SIM Card SIM800H Module Unsoldered
SKU: 1031144- Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash 4MB / PSRAM 8MB
- SRAM:520 kB SRAM
- Button: Reset
- USB to TTL: CP2104
- Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO
- On-board clock:40MHz crystal oscillator
- Working voltage:2.7V-3.6V
- Working current: About 70mA
SKU: 1031144 -
IoT Development Boards
LILYGO TSIM7000G Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board
IoT Development BoardsLILYGO TSIM7000G Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board
SKU: 1031147- Main chip: ESP32-WROVER-E, SIM7000G
- Flash Memory:4M Flash / 8M PSRAM
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- SIM Card Size: Nano SIM Card
- Antenna: SIM Antenna,GPS Antenna
- Operating Temperature Range:-40-85 degrees
SKU: 1031147 -
LORA Module
LILYGO T-Beam Helium V1.2 ESP32 LORA 868MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
LORA ModuleLILYGO T-Beam Helium V1.2 ESP32 LORA 868MHz WiFi Wireless Bluetooth Module with IPEX &18650 Battery Holder-Unsoldered
SKU: 1031140-
Power Supply: Input USB 5V/1A
-
Charging current :500mA
-
Battery Input: 3.7-4.2V
- It also has a digital RSSI function, RF wake-up function,
- 4MB flash memory,
- Low voltage detection, and temperature sensor,
- Fast wake-up and frequency hopping LED signal indicator, and battery with data backup.
SKU: 1031140 -
-
-
IoT Development Boards
LILYGO TCall & SIM800C-DS V02 ESP32 WIFI Bluetooth Nano Card Slot SIM800C Development Board
IoT Development BoardsLILYGO TCall & SIM800C-DS V02 ESP32 WIFI Bluetooth Nano Card Slot SIM800C Development Board
SKU: 1031143- Working voltage: 2.7V-3.6V
- Chipset: ESP32-WROVER-B
- SIM Type: SIM800C
- SRAM: 520 kB SRAM
- Button: Power Switch, Reset
- External port: SIM Antenna, MIC, Speaker
- USB to TTL: CP2104
SKU: 1031143 -
USB Interface Module
LILYGO TTGO T-Internet-POE ESP32-WROOM LAN8720A Chip Ethernet Adapter And Downloader Expansion Board Programmable Hardware
USB Interface ModuleLILYGO TTGO T-Internet-POE ESP32-WROOM LAN8720A Chip Ethernet Adapter And Downloader Expansion Board Programmable Hardware
SKU: 1031132- Chipset: ESPRESSIF-ESP32-WROOM, LAN8720A Ethernet chip, SI3404 Power management chip
- FLASH:4MB
- SRAM:520kB SRAM
- It has a type-c USB.
- Support cloud server development /SDK for user firmware development.
SKU: 1031132 -
Bluetooth and NRF Modules
LILYGO T8 V1.7 ESP32 8MB PSRAM TF CARD 3D ANTENNA WiFi &, Bluetooth ESP32-WROVER-Unsoldered
Bluetooth and NRF ModulesLILYGO T8 V1.7 ESP32 8MB PSRAM TF CARD 3D ANTENNA WiFi &, Bluetooth ESP32-WROVER-Unsoldered
SKU: 1031137- Brand Name: LILYGO
- Model Number: TTGO T8 V1.7 ESP32
- Compatible Audio and Video Equipment Style: Amplifier
- Weight:9.5g
- Lastest ESP32 Version: REV1
- WIFI & Bluetooth
- 16MB Flash & 8MB PSRAM
SKU: 1031137 -
IoT Development Boards
LILYGO SIM7600E-H Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board Unsoldered
IoT Development BoardsLILYGO SIM7600E-H Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board Unsoldered
SKU: 1031136- Main chip:ESP32 WROVER-E
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- Antenna: SIM Antenna，GPS Antenna
- Operating Temperature Range:-40-85 degrees
SKU: 1031136 -
Temperature & Humidity Sensor
LILYGO T-Higrow ESP32 Wifi Bluetooth Humidity Photometric Electrolyte Sensor Unsoldered
Temperature & Humidity SensorLILYGO T-Higrow ESP32 Wifi Bluetooth Humidity Photometric Electrolyte Sensor Unsoldered
SKU: 1031146- Chipset:ESPRESSIF-ESP32 (Wi-Fi & Bluetooth)240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor
- Flash:QSPI flash 4MB
- SRAM:520 kB SRAM
- Button:IO0
- Wake up:IO35
- It is easy to carry anywhere.
SKU: 1031146 -
LORA Module
Unsoldered Lora 868MHz Shield for LILYGO T-SIM7000G Module
SKU: 1031135- Standard:FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC (ESP32 chip)
- Protocol:802.11 b/g/n
- Frequency range:2.4GHz~2.5GHz(2400M~2483.5M)
- Transmit Power:22dBm
- Communication distance:300m
- The wireless communication module supports cloud server development and SDK for user firmware development.
SKU: 1031135 -
-
-
LORA Module
LILYGO T8 V1.7 ESP32-WROVER 8MB PSRAM TF CARD 3D ANTENNA WiFi & Bluetooth Module Micro-Python
LORA ModuleLILYGO T8 V1.7 ESP32-WROVER 8MB PSRAM TF CARD 3D ANTENNA WiFi & Bluetooth Module Micro-Python
SKU: 1031138- Lastest ESP32 Version: REV1
- Connectivity: WIFI & Bluetooth
- Memory: 4MB Flash4MB PSRAM
- Lithium battery interface, 500mA Max charging current
- Onboard TF CARD Slot
- Default firmware: Latest Micropython firmware
SKU: 1031138 -
-
-
IoT Cameras
LILYGO T-Camera ESP32 WROVER & PSRAM Camera Module ESP32-WROVER-B OV2640 Camera Module 0.96 OLED Normal Camera with Mic
IoT CamerasLILYGO T-Camera ESP32 WROVER & PSRAM Camera Module ESP32-WROVER-B OV2640 Camera Module 0.96 OLED Normal Camera with Mic
SKU: 1031125- Master Chip: esp32 dual-core
- Protocol: Wi-Fi 802.11 b/g/n & bluetooth 4.2 BLE & BR/EDR
- Flash: 4MBytes
- PSRAM: 8MBytes
- Display chip: SSD1306 I2C
- Display type: OLED
SKU: 1031125 -
-
IoT Development Boards
LILYGO® T7 S3 ESP32-S3 Development Board WIFI Bluetooth 5.0 32-bit LX7 Dual-core ESP32-S3-WROOM-1 Module 8MB PSRAM 16MB Flash
IoT Development BoardsLILYGO® T7 S3 ESP32-S3 Development Board WIFI Bluetooth 5.0 32-bit LX7 Dual-core ESP32-S3-WROOM-1 Module 8MB PSRAM 16MB Flash
SKU: R133400- MCU: ESP32-S3-WROOM-1 Xtensao 32-bit RISC-V MCU
- Support Wi-Fi, Bluetooth 5 + Bluetooth Mesh
- Flash: 16MB
- PSRAM: 8MB
- Programming language: C/C++, MicroPython
- Programming platform: Arduino-IDE, VS Code
SKU: R133400 -
IoT Cameras
LILYGO T-Camera Plus Camera Module OV2640 1.3 Inch Display Rear Camera Fish-eye Lens Rear Camera
IoT CamerasLILYGO T-Camera Plus Camera Module OV2640 1.3 Inch Display Rear Camera Fish-eye Lens Rear Camera
SKU: 1031128- Chipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6
- FLASH: QSPI flash/SRAM, up to 4 x 16 MB
- SRAM:520 kB SRAM + 8MBytes External SPRAM
- KEY: reset
- display: IPS Panel ST7789/1.3 Inch
- Power indicator lamp: red
- USB to TTL: CP2104
- Camera: OV2640 2Megapixel
SKU: 1031128 -
-
Other ESP WIFI Modules
LILYGO® T-Dongle-S3 ESP32-S3 Development Board With Screen Dongle 0.96 inch ST7735 LCD Display Support WiFi Bluetooth TF Card
Other ESP WIFI ModulesLILYGO® T-Dongle-S3 ESP32-S3 Development Board With Screen Dongle 0.96 inch ST7735 LCD Display Support WiFi Bluetooth TF Card
SKU: R133405- Model: ST7735 LCD
- MCU: ESP32-S3 Xtensa LX7 microprocessor
- Wireless Connectivity: Wi-Fi 802.11 b/g/n, bluetooth5
- Working Power Supply: 3.3V
- Platform: Arduino-ide,PlatformlO-ide,Micropython
- Onboard functions: 16M Flash, Boot button, TF card
- Full color (65k) Display, 4-Wire SPI interface
- Resolution: 80 X 160, 0.96 diagonal
SKU: R133405 -
IoT Cameras
LILYGO T-Journal ESP32 OLED Normal Camera Module Development Board With OV2640 SMA Wifi 3dbi Antenna
IoT CamerasLILYGO T-Journal ESP32 OLED Normal Camera Module Development Board With OV2640 SMA Wifi 3dbi Antenna
SKU: 1031133- Material: Metal
- FLASH: QSPI flash/SRAM, up to 4 x 16 MB
- SRAM: 520 kB SRAM
- KEY: reset，IO32
- Display: 0.91 SSD1306
- Power Indicator Lamp: Red
- USB to TTL: CP2104
- Camera: OV2640 2Megapixel
- High sensitivity and low light operation standard SCCB interface.
SKU: 1031133 -
e-Ink Paper Display
LILYGO® T5 4.7 Inch E-Paper V2.3 ESP32-S3 Development Driver Board TTGO Display Module Support TF Arduino (Female pin Welded Version)
e-Ink Paper DisplayLILYGO® T5 4.7 Inch E-Paper V2.3 ESP32-S3 Development Driver Board TTGO Display Module Support TF Arduino (Female pin Welded Version)
SKU: R133406- MCU: ESP32-S3-WROOM-1-N16R8
- Wireless Connectivity: Wi-fi Bluetooth V5.0
- Programming Environment: Arduino-ide VS Code
- Support PCF8563 RTC: Battery capacity detection
- Gray levels: 16
- Resolution: 540 x 960 pixels
- Ultra-Wide viewing angle: low power consumption
SKU: R133406 -
IoT Cameras
LILYGO OV2640 1.3 Inch T-Camera Plus Fish-eye Lens Rear Camera Module with MPU6050
SKU: 1031129- Chipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor
- FLASH: QSPI flash/SRAM, up to 4 x 16 MB
- SRAM:520 kB SRAM + 8MBytes External SPRAM
- KEY: reset
- display: IPS Panel ST7789/1.3 Inch
- Power indicator lamp: red
- USB to TTL: CP2104
- Camera: OV2640 2Megapixel
- on-board clock:40MHz crystal oscillator
SKU: 1031129 -
IoT Development Boards
LILYGO➅ ESP32-S3 SIM7670G 4G Development Board Module Support LTE Cat-1/WiFi/Bluetooth/GNSS Positioning Global Multi-band Communication
IoT Development BoardsLILYGO➅ ESP32-S3 SIM7670G 4G Development Board Module Support LTE Cat-1/WiFi/Bluetooth/GNSS Positioning Global Multi-band Communication
SKU: R133394- MCU: ESP32-S3
- LTE and GSM: SIM7670G
- Clock speed: 240MHz
- Flash: 16MB
- PSRAM: 8MB
- Peripheral interfaces: I2C, SPI, UART, SDIO, I2S, CAN
SKU: R133394 -
IoT Development Boards
LILYGO® T-ETH-Lite Development Board ESP32 ESP32-S3 W5500 Ethernet Module ESP32-S3-WROOM Support TF Expandable Power POE Shield
IoT Development BoardsLILYGO® T-ETH-Lite Development Board ESP32 ESP32-S3 W5500 Ethernet Module ESP32-S3-WROOM Support TF Expandable Power POE Shield
SKU: R133398- MCU: ESP32-S3-WR0OM-1
- Ethernet: W5500
- Shield: POE/Camera-Shield
- Button: Reset + Boot
- Onboard: Ethernet + TF Card
- Memory: Flash: 16MB, PSRAM: 8MB
SKU: R133398 -
IoT Development Boards
LILYGO® T-POE Pro ESP32-WROVER-E Wireless Expansion Board With LAN8720 Ethernet, RS85 & POE Function
IoT Development BoardsLILYGO® T-POE Pro ESP32-WROVER-E Wireless Expansion Board With LAN8720 Ethernet, RS85 & POE Function
SKU: R133397- MCU: ESP32-WROVER-E
- Flash: 16MB
- PSRAM: 8MB
- Wireless Connectivity: Wi-Fi: 802.11 b/g/n/, BLE V4.2
- Buttons: Reset Button + Boot Button
- Serial Chip: CH9102
- Onboard Function: Expandable LCD screen interface
SKU: R133397 -
IR and RF Transmitters and Receivers, LORA Module
LILYGO T-TWR
SKU: R160887- Microcontroller: ESP32-S3-WROOM-1-N16R8 for high performance.
- Memory: 16MB Flash and 8MB PSRAM for efficient operation.
- Wireless Connectivity: Integrated Wi-Fi, Bluetooth 5 (LE), and SA868 Wireless Transceiver.
- Walkie-Talkie Functionality: Enables real-time voice communication.
- Onboard Controls: Four buttons (PPT, Boot, PWR, Reset) for user interaction.
SKU: R160887 -
-
IoT Development Boards, LORA Module
LILYGO T-Energy S3 ESP32-S3-WROOM-1 16MB Flash 8MB PSRAM 18650 Battery WiFi Bluetooth Module
IoT Development Boards, LORA ModuleLILYGO T-Energy S3 ESP32-S3-WROOM-1 16MB Flash 8MB PSRAM 18650 Battery WiFi Bluetooth Module
SKU: R160900- Microcontroller: ESP32-S3 dual-core for high-performance processing.
- Memory: 16MB Flash and 8MB PSRAM for ample storage.
- Wireless Connectivity: Supports 2.4 GHz Wi-Fi and Bluetooth 5 (LE).
- Programming Languages: Compatible with C/C++, MicroPython, and Lua.
- Development Platforms: Works with Arduino IDE, VS Code, and ESP-IDF.
SKU: R160900 -
IoT Development Boards
LILYGO® T-RSS3 ESP32-S3 Development Board RS232 RS485 5V Module On-Board WS2812 Wi-Fi Bluetooth 5.0 Type C RSM232MT5V RSM485MT5V
IoT Development BoardsLILYGO® T-RSS3 ESP32-S3 Development Board RS232 RS485 5V Module On-Board WS2812 Wi-Fi Bluetooth 5.0 Type C RSM232MT5V RSM485MT5V
SKU: R133392- MCU: ESP32-S3 dual-core XTensa LX7 MCU
- Wireless: Wi-Fi / Bluetooth 5 (LE)
- Flash: 8MB
- Programming platform: Arduino, ESP-IDF
- Onboard functions: WS2812(GPIO1)
- Button: Reset+ Boot(GPIO0)+ IO2
- Adapt to RS232 DB9 female connector, DC input 7V~24V
SKU: R133392 -
IoT Development Boards
LILYGO® T-Display-S3 AMOLED ESP32-S3 1.91-inch RM67162 AMOLED Display Development Board OLED WIFI Bluetooth 5.0 Wireless Module
IoT Development BoardsLILYGO® T-Display-S3 AMOLED ESP32-S3 1.91-inch RM67162 AMOLED Display Development Board OLED WIFI Bluetooth 5.0 Wireless Module
SKU: R133403- MCU: ESP32-S3R8 Dual-core LX7 microprocessor
- Wireless Connectivity: 2.4 GHz Wi-Fi & Bluetooth5 (LE)
- Development: Arduino, PlatformIO-IDE, Micropython
- Flash: 16MB
- PSRAM: 8MB
- Resolution: 240 X RGB X 536(H)
- Interface: QSPI
- Driver IC: RM67162
SKU: R133403 -
IoT Development Boards
LILYGO® T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth
IoT Development BoardsLILYGO® T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth
SKU: R133393- MCU: ESP32-S3R8 Dual-core LX7 microprocessor
- Wireless Connectivity: 2.4 GHz Wi-Fi & Bluetooth 5 (LE)
- Development: Arduino, PlatformIO-IDE, Micropython
- Flash: 16MB
- PSRAM: 8MB
- Language: C, C++, Lua
- Onboard functions: Boot Button + Reset + Micro SD
SKU: R133393 -
Relay Modules
LILYGO T-Relay S3
SKU: R160916- Microcontroller: ESP32-S3-WROOM-1U for efficient dual-core processing.
- Memory: 16MB Flash and 8MB PSRAM for smooth operation.
- Wireless Connectivity: Wi-Fi (802.11 b/g/n) and Bluetooth 5 support.
- Relay Outputs: Six relays for controlling high-voltage devices.
- User Controls: Reset and Boot buttons for easy operation.
SKU: R160916 -
LORA Module
LILYGO T-Lora C6
SKU: R160890- Microcontroller: ESP32-C6-MINI-1 with Wi-Fi 6 and Bluetooth 5 (LE).
- LoRa Transceiver: SX1262 for long-range, low-power communication.
- Frequency Support: Operates at 868 MHz and 915 MHz.
- Programming Support: Compatible with C/C++, MicroPython, and Lua.
- Development Platforms: Works with Arduino IDE, VS Code, and ESP-IDF.
SKU: R160890 -
Electronic Modules and Displays
LILYGO T-Display S3 AMOLED (Ds) 1.64 inch
SKU: R160892- Display Type: 1.64-inch AMOLED, 280 x 456 pixels
- Memory: 16MB flash, 8MB PSRAM
- Connectivity: 2.4 GHz Wi-Fi and Bluetooth 5 (LE)
- Battery Management: Voltage detection via IO04 pin
- Development Compatibility: Arduino IDE, PlatformIO, ESP-IDF
SKU: R160892 -
Electronic Modules and Displays
LILYGO T-Display S3 AMOLED (Ds) 1.43 inch
SKU: R160894- Display Type: 1.43-inch AMOLED, 466 x 466 px pixels
- Memory: 16MB flash, 8MB PSRAM
- Connectivity: 2.4 GHz Wi-Fi and Bluetooth 5 (LE)
- Battery Management: Voltage detection via IO04 pin
- Development Compatibility: Arduino IDE, PlatformIO, ESP-IDF
SKU: R160894
