Pololu is a prominent electronics manufacturer and online retailer that caters to the educational, maker, and professional engineering sectors. Our product range encompasses an extensive array of offerings, including sensors, motion control electronics, motors, wheels, and even complete robots. Our commitment revolves around providing meticulously engineered, high-quality products, empowering our customers to transform their ideas into tangible realities.
Within our wide catalog of products, Robu has thoughtfully curated a selection that includes Power Distribution Boards (PDB) and motor drivers essential for building robots. We invite you to explore our collection and shop now to enhance your robot-building projects with the precision and reliability that Pololu is renowned for. Your journey from concept to creation begins here, at Robu.
Pololu
Showing all 31 results
-
Pololu Motor Drivers
Pololu DRV8835 Dual Motor Driver Carrier
SKU: 1607672- Under-voltage lockout on the logic supply and protection against over-current and over-temperature
- Reverse-voltage protection on the motor supply
- Compact size (0.7″×0.4″) with the form factor of a 14-pin DIP package
- Inputs are 3V- and 5V-compatible
SKU: 1607672 -
Pololu Motor Drivers
Pololu DRV8834 Low-Voltage Stepper Motor Driver Carrier
SKU: 1607671- Built-in regulator (no external logic voltage supply needed)
- Short-to-ground, short-to-supply, and shorted-load protection
- 4-layer, 2Â oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
- Simple step and direction control interface
SKU: 1607671 -
Pololu Motor Drivers
Pololu DRV8256E Single Brushed DC Motor Driver Carrier
SKU: 1607670- built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature
- simple two-pin speed direction interface
- Under-voltage lockout and protection against over-current and over-temperature
- Simple interface requires only two I/O lines (one for direction and another for speed)
SKU: 1607670 -
Pololu Motor Drivers
Pololu High-Power Stepper Motor Driver 36v4
SKU: 1607680- Inputs compatible with 1.8Â V, 3.3Â V, and 5Â V logic
- Under-voltage lockout, over-current protection, short circuit protection, and reverse-voltage protection (up to 40Â V)
- High-power: can deliver up to 4Â A continuous per phase without extra cooling (6Â A max with sufficient additional cooling)
- Highly configurable through SPI interface
- Optional STEP/DIR control pins (stepping can also be controlled through SPI interface alone)
SKU: 1607680 -
Pololu Motor Drivers
Pololu DRV8838 Single Brushed DC Motor Driver Carrier
SKU: 1607673- Reverse-voltage protection on the motor supply
- H-bridge motor driver: can drive one DC motor
- Motor supply voltage: 0Â V to 11Â V
- Logic supply voltage: 1.8Â V to 7Â V
- easy to use with standard solderless breadboards
SKU: 1607673 -
-
-
Pololu Motor Drivers
Pololu MAX14870 Single Brushed DC Motor Driver Carrier
SKU: 1607674- No separate logic supply needed; inputs are 3V- and 5V-compatible
- Under-voltage lockout and protection against over-current/short-circuit and over-temperature
- Carrier board adds reverse-voltage protection
- Compact size (0.6″×0.5″)
SKU: 1607674 -
-
Robotics Kits
Pololu 3pi+ 32U4 OLED Robot Kit with 30:1 MP Motors (Standard Edition Kit)
SKU: 1607667- Quadrature encoders on both motors for closed-loop position and speed control
- Graphical OLED display
- Full 9-axis IMU (three-axis gyro, accelerometer, and compass)
- Full wrap-around bumper to protect electronics from collisions
SKU: 1607667 -
Stepper Motor Drivers
Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
SKU: R175420- Multiple Control Interfaces: USB, TTL, I²C, analog, RC, and quadrature.
- Voltage Range: Operates from 4.5 V to 35 V.
- Current Capacity: Up to 1.5 A continuous, 2.5 A peak.
- Microstepping: Adjustable up to 1/8-step resolution.
- User-Friendly: Free configuration software included.
- Safety Features: Adjustable current limits and optional limit switch inputs.
SKU: R175420 -
Pololu Motor Drivers
Motoron M2U550 Dual Serial Motor Controller (Header Pins Soldered)
SKU: R175409- Dual Motor Control: Operates two DC motors independently.
- Wide Voltage Range: 1.8 V to 22V supply.
- Current Capacity: 1.6 A continuous, 5 A peak per motor.
- UART Interface: Easy integration with microcontrollers.
SKU: R175409 -
Brushed / Brushless DC motor Driver
DRV8876 (QFN) Single Brushed DC Motor Driver Carrier
SKU: R175416- Voltage Range: 4.5 V to 37 V
- Current: 1.1 A continuous, 2 A peak
- Control Modes: Phase/enable, PWM, independent half-bridge
- Protection Features: Over-current, under-voltage, over-temperature
- Reverse Voltage Protection: Ensures safety
- RoHS Compliant: Eco-friendly
SKU: R175416 -
Pololu Motor Drivers
Pololu AMIS-30543 Stepper Motor Driver Carrier
SKU: 1607668- Compatible with 5Â V and 3.3Â V microcontrollers
- Integrated 5V regulator that can be used to supply an external microcontroller
- Integrated watchdog function
- Open coil detection
- Thermal warning indicates when the driver is close to the thermal shutdown temperature
- Over-current status and shutdown (short-to-ground and shorted-load protection)
- Reverse voltage protection
SKU: 1607668 -
Pololu Motor Drivers
Pololu Dual VNH5019 Motor Driver Shield for Arduino
SKU: R175418- Model: Pololu Dual VNH5019 Motor Driver Shield
- Current Capacity: Up to 12 A continuous (30 A max) per motor
- Voltage Range: 5.5 to 24 V
- PWM Support: Quieter operation up to 20 kHz
- Compatibility: Works with 5V and 3.3V systems
SKU: R175418 -
Pololu Motor Drivers
Motoron M3S550 Triple Motor Controller Shield for Arduino (Connectors Soldered)
SKU: R175410- Controls Up to Three Motors: Independent control of three bidirectional brushed DC motors.
- Wide Voltage Range: Supports 1.8 V to 22V for motor supply.
- Current Output: Up to 1.7 A continuous per motor.
- I²C Interface: Simple two-wire communication.
- Stackable Design: Multiple shields can be stacked for expanded control.
SKU: R175410 -
Pololu Motor Drivers
Motoron M3S256 Triple Motor Controller Shield for Arduino (Connectors Soldered)
SKU: R175412- Controls: Up to three brushed DC motors.
- Current: 2 A continuous per motor.
- Stackable: Multiple shields can be added.
- Protection: Reverse-voltage protection included.
- Configurable: Motion parameters are adjustable.
- Compatibility: Works with Arduino boards.
SKU: R175412 -
Pololu Motor Drivers
Motoron M1U550 Single Serial Motor Controller (Header Pins Soldered)
SKU: R175407- Multiple Controllers: Supports daisy-chaining for more motors.
- Customization: Various settings for fine-tuning motor performance.
- Error Handling: Features for automatic response to errors.
- Easy Setup: Comes with pre-soldered headers for quick installation.
SKU: R175407 -
Brushed / Brushless DC motor Driver
DRV8874 Single Brushed DC Motor Driver Carrier
SKU: R175415- Voltage Range: 4.5 V to 37 V
- Continuous Current: 2.1 A; Peak: 4.4 A
- Protection Features: Over-current, under-voltage, over-temperature
- Control Modes: Phase/enable and PWM
- Reverse Voltage Protection: Ensures safe operation
- Easy Integration: Compatible with microcontrollers
SKU: R175415 -
Pololu Motor Drivers
Pololu BD65496MUV Single Brushed DC Motor Driver Carrier
SKU: 1607669- Under-voltage lockout on the logic supply and protection against over-temperature
- Carrier board adds reverse-voltage protection on the motor supply
- Compact size (0.6″×0.6″)
- Built-in under-voltage and over-temperature protection
SKU: 1607669 -
Brushed / Brushless DC motor Driver
VNH5019 Motor Driver Carrier
SKU: R175417- Voltage Range: 5.5 to 24 V
- Current Rating: 12 A continuous, 30 A peak
- Protections: Over-voltage, under-voltage, over-temperature, and over-current
- LED Indicators: Motor status display
- Compact Design: Fully assembled for easy use
SKU: R175417 -
Brushed / Brushless DC motor Driver
TB9051FTG Single Brushed DC Motor Driver Carrier
SKU: R175419- Voltage Range: 4.5 V to 28V.
- Current: Up to 2.6 A continuous, 5 A peak.
- Compact Size: Fits in tight spaces.
- PWM Control: Enables precise motor speed and direction.
- Easy Setup: Pre-soldered components for quick connections.
- Error Output: Alerts for operational issues.
SKU: R175419 -
Pololu Motor Drivers
Motoron M3H550 Triple Motor Controller for Raspberry Pi (Connectors Soldered)
SKU: R175411- Controls up to three brushed DC motors.
- Compatible with Raspberry Pi (Model B+ and newer).
- I²C interface requires only two GPIO pins.
- Motor supply voltage: 1.8 V to 22 V.
- Continuous output current: up to 1.7 A per motor.
- Stackable design for expanded motor control.
SKU: R175411 -
Pololu Motor Drivers
Motoron M3H256 Triple Motor Controller for Raspberry Pi (Connectors Soldered)
SKU: R175413- Controls 3 DC Motors: Bidirectional.
- Voltage Range: 4.5 V to 48 V.
- Current: 2 A continuous, 6.4 A peak.
- Stackable: Multiple units on one Raspberry Pi.
- I²C Interface: Uses 2 GPIO pins.
- Configurable Settings: Adjustable acceleration and speed.
SKU: R175413 -
Pololu Motor Drivers
Motoron M2T550 Dual I²C Motor Controller (Header Pins Soldered)
SKU: R175408- Controls Two Motors: Operates two DC motors independently via I²C.
- Voltage Range: Supports 1.8 V to 22 V.
- Current: Up to 1.6 A continuous per motor.
- Compact Design: Small size (0.6″ × 0.8″).
- Configurable Parameters: Adjustable settings for motion control.
SKU: R175408 -
Brushed / Brushless DC motor Driver
Motoron M1T550 Single I²C Motor Controller (Header Pins Soldered)
Brushed / Brushless DC motor DriverMotoron M1T550 Single I²C Motor Controller (Header Pins Soldered)
SKU: R175406- I²C Interface: Connects multiple controllers easily.
- Voltage Range: Supports 1.8 V to 22 V.
- Current Capacity: 1.8 A continuous, 5 A peak.
- Single Connection: Simplifies setup with no PWM needed.
- Configurable Motion: Customizable speed and acceleration.
- Error Management: Built-in features for troubleshooting.
SKU: R175406 -
Stepper Motor Drivers
A5984 Stepper Motor Driver Carrier, Adjustable Current, Blue Edition
SKU: R175414- Voltage Range: 8 V to 40 V.
- Current: 1.2 A continuous, 2 A peak.
- Microstepping: 8 resolutions down to 1/32-step.
- Adjustable Limit: Set with onboard potentiometer.
- Protection: Over-current and over-temperature.
- PCB: 4-layer for better cooling.
SKU: R175414 -
Pololu Motor Drivers
Pololu TB67S249FTG Stepper Motor Driver Compact Carrier
SKU: 1607681- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3 V and 5 V systems
- Under-voltage lockout and protection against over-current/short-circuit and over-temperature
- Open-load detection
- Active-low error outputs indicate over-current, over-temperature, or open-load condition
- Compact size (0.6″ × 0.8″)
- 4-layer, 2 oz copper PCB for improved heat dissipation
SKU: 1607681 -
Pololu Motor Drivers
Pololu MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control
SKU: 1607675- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3Â V and 5Â V systems
- Over-temperature thermal shutdown, over-current shutdown, short circuit protection, and under-voltage lockout
- 4-layer, 2Â oz copper PCB for improved heat dissipation
SKU: 1607675
