SmartElex
Showing 97–144 of 164 results
-
Electronics Components on Sale, SmartElex Development Board
SmartElex ATmega2560 Development Board
-17%
Electronics Components on Sale, SmartElex Development BoardSmartElex ATmega2560 Development Board
SKU: 245283- Microcontroller: ATMEGA2560 with 16 MHz crystal with On-Board USBASP Programmer.
- Power: 7 to 15 VDC with Reverse Polarity Protection.
- 2.4GHz ZigBee (XBee) wireless module adaptor
- 2×16 Character Alphanumeric LCD.
- SD card Holder.
- CH340G USB to Serial converter.
- ESP8255 Adaptor interface with USB to Serial Converter.
SKU: 245283 -
-
Battery Chargers, Battery Charging Boards
SmartElex 2s 18650 Li-Ion Battery Charger
SKU: 611924- Input Voltage: 5V.
- Max Input Voltage: – 6V
- Input Interface: Micro USB port/ DC jack.
- Charge Current: up to 1A / 2A.
- A full charge voltage: 4.2V.
- Over-Voltage Detection Feature: Yes.
- Under-Voltage Detection Feature: Yes.
- Charging indicator LED: Charging / Full charge/ Battery detects.
- Charging through Micro-USB: YES
- On- Board 18650 cell socket: – Yes.
SKU: 611924 -
-
-
SmartElex Bluetooth + WiFi Modules
SmartElex ESP32-S3-Development Kit M-1 – 1 PCS
SKU: R150544- 802.11 b/g/n
- Bit rate: 802.11n up to 150 Mbps
- Â A-MPDU and A-MSDU aggregation
- Â Bluetooth LE: Bluetooth 5, Bluetooth mesh
- Â Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
- Operating voltage/Power supply: 3.0 ~ 3.6 V
-  Operating ambient temperature: –40 ~ 85 °C
SKU: R150544 -
-
SmartElex Current Sensors
SmartElex Current Sensor Breakout – ACS723 (Low Current)
SKU: R101038- DC and AC currents : 10mA up to 5A
- Full electrical isolation of measured and sensed circuits
- The version without the op-amp has a base sensitivity of 400mV/A
- Adjustable sensitivity with on-board amplifier, gain from 2.2 to 22 V/V
SKU: R101038 -
SmartElex Programmer Modules
SmartElex CAN Controller Module – TJA1050
SKU: R179553- Onboard TJA1050 CAN controller interface chip
- Chip commonly used pin has led, convenient connection to use
- Pin 5 v to the power supply
- PCB board size: 22 (mm) x11.5 (mm)
- Fully compatible with the ISO 11898 standard
- High speed (up to 1 Mbaud)
SKU: R179553 -
SmartElex Audio Modules
SmartElex High Current Active Alarm Buzzer Driver Module
SKU: R196223- Compatible with Arduino and microcontrollers.
- Operating voltage: 3.5-5.5V, current: <25mA.
- Generates 1.5-2.5 kHz tones via PWM or frequency switching.
- It is easier to control compared to passive buzzers.
SKU: R196223 -
-
-
SmartElex Level Shifter Modules
SmartElex Opto-isolator Breakout -ILD213T
SKU: R183235- Opto-Isolation: Safely isolates low-voltage and high-voltage systems.
- Dual LED & Photodiode: Built-in for effective signal transmission.
- Noise Reduction: Ideal for controlling high-voltage devices, minimizing interference.
- Two Channels: Dual-channel support for versatile applications.
- Logic Correction: Maintains signal logic with integrated transistors.
- High Data Rate: Supports up to 9600 bps; compatible with MIDI applications (31250 bps).
SKU: R183235 -
-
SmartElex DC Motor Drivers
SmartElex TMC6300 3 Phase Brushless Motor Driver
SKU: R189065- TMC6300 motor driver for 3-phase BLDC/PMSM motors.
- Voltage range: 2-11V; max current: 2A (1.4ARMS).
- High-side and low-side MOSFET pairs for phase control.
- Integrated protections: thermal shutdown and short circuit.
- Diagnostic output for system fault monitoring.
- Breadboard-friendly design with accessible thermal pad.
SKU: R189065 -
SmartElex Level Shifter Modules
SmartElex Logic Level Converter – Single Supply-TXB0104
SKU: R183237- Logic Translator IC: Texas Instruments
- Voltage Support: High Side 5V to 1.8V (default is 3.3V)
- Power Supply: 3.3V (single supply operation)
- Data Rate: Supports up to 100 Mbps
- Input Voltage Range: 1.8V to 5V
- Signal Type: Bi-directional
SKU: R183237 -
SmartElex Programmer Modules
SmartElex USB to RS-485 Converter
SKU: R179552- Fully equipped with SP3485 RS-485 transceiver and FT232RL USB UART IC
- Operates from USB supply
- RX, TX, and RTS LED indicators
- USB power and RX/TX lines broken out to a 0.1″ pitch header
- RS-485 input/output broken out to RJ-45 connector, 3.5mm screw terminal, and 0.1″ pitch header
- Driver/Receiver Enable connected to RTS line of FT232RL
- -7V to +12V Common-Mode Input Voltage Range
SKU: R179552 -
SmartElex ZIGBEE Modules
SmartElex ESP32-C6-WROOM-1-N8 Development Board
SKU: R150563- VDD33 Power supply voltage:Â 3.0 ~ 3.6 V
- IV DD Current delivered by external power supply: 0.5 A
- TA Operating ambient temperature : –40 ~ 85 °C / – 40~105 °C
- 1T1R in 2.4 GHz band
- Â Operating frequency: 2412 ~ 2484 MHz
SKU: R150563 -
SmartElex LORA+ WAN Breakout Board
SmartElex E22-400T33S UART 433Mhz Breakout Board
SKU: R150560- Working frequency (MHz):Â 410.125 – 493.125
- Transmit power (dBm): 33.0±0.5
- blocking power(dBm): 0 ~ 10.0
- Receive sensitivity(dBm): -147±1.0
- Measured distance (Km): 16
- Air speed (bps):Â 2.4k~62.5kbps
SKU: R150560 -
SmartElex DC Motor Drivers, SmartElex Smart Motor Drivers
SmartElex – Industrial Grade 15D Motor Driver
SmartElex DC Motor Drivers, SmartElex Smart Motor DriversSmartElex – Industrial Grade 15D Motor Driver
SKU: R100171- Support motor voltage from 7V to 28V.Â
- Independent direction and speed control Â
- Onboard Low, Internal resistance MOSFETs are switched at 16 KHz frequency.Â
- Overcurrent and Thermal protection.Â
SKU: R100171 -
SmartElex Audio Modules
SmartElex Stereo 3.7W Class D Audio Amplifier – MAX98306
SKU: R196221- MAX98306 chip-based stereo audio amplifier.
- 2 x 3.7W output for 3Ω speakers.
- Efficiency > 90% for battery-powered projects.
- Five pin-selectable gain levels (6dB to 18dB).
- Features thermal and short-circuit protection.
SKU: R196221 -
SmartElex Audio Modules
SmartElex Passive Buzzer Module
SKU: R196224- Operating Voltage: 3.3V-5V DC.
- Produces tones from 1.5 to 2.5 kHz.
- Compatible with Arduino microcontrollers.
- 2.54mm pin pitch for easy integration.
- Lightweight and durable plastic construction.
- Ideal for alarms, toys, and electronic projects.
SKU: R196224 -
SmartElex Programmer Modules
SmartElex CH340C and USB-C Serial Basic Breakout Module
SKU: R179549- CH340C ICÂ Converts serial to USB.
- USB-C Connector, Reversible, up to 1.5A power.
- Supports 5V and 3.3V
- Standard Pinout: Matches DTR/RXI/TXO/VCC/CTS/GND.
- Versatile Use: Great for debugging and general serial communication.
SKU: R179549 -
SmartElex ZIGBEE Modules
SmartElex ESP32-C6 Development Board- 1 PCS
SKU: R150739- VDD33 Power supply voltage:Â 3.0 ~ 3.6 V
- IV DD Current delivered by external power supply: 0.5 A
- TA Operating ambient temperature : –40 ~ 85 °C / – 40~105 °C
- 1T1R in 2.4 GHz band
- Â Operating frequency: 2412 ~ 2484 MHz
SKU: R150739 -
-
-
SmartElex LORA+ WAN Breakout Board
SmartElex E32-433T20S Ebyte SX1278 433MHz Breakout Board
SKU: R150559- Max TX Power (dBm):Â 20
- RX Sensitivity (dBm): 123~125
- Reference Distance (M): 5K
- Work (MHz): 410~441
- Frequency Band (MHz):Â 862 ~ 930
- Air Rate (bps):Â 2.4K ~19.2K
- Block Power (dBm): 10
SKU: R150559 -
-
-
-
SmartElex Stepper Motor Drivers
SmartElex DRV8825 Stepper Motor Driver with Aluminum Heat Sink
SKU: R189063- 4-bit bi-directional logic level translation.
- Automatic direction sensing for easy use.
- Supports 5V high side and programmable low-side voltages.
- Eliminates need for a second power supply.
- Compatible with 3.3V, 2.5V, and 1.8V low side.
- Compact and efficient design for versatile applications.
SKU: R189063 -
-
SmartElex Programmer Modules
SmartElex RS232 Shifter – SMD
SKU: R179548- Compact RS232 to TTL converter.
- Voltage compatibility: 2.8V to 5V.
- Supports data speeds: 300bps to 115200bps.
- TX and RX LEDs for status indication.
- Fully assembled; and ready for use.
- Connect via a 4-pin header or wires.
SKU: R179548 -
SmartElex Bluetooth + WiFi Modules
SmartElex ESP32 WROOM_C Development Board – 1 PCS
SKU: R150538- Operating Voltage: 2.3 to 3.6 V
- Operating Temperature: -40 to 85 °C
- Xtensa® Single-Core 32-bit LX6 Microprocessor (up to 240MHz)
- 448KB of ROM and 520KB SRAM
- 16MB of Embedded SPI flash storage
- Integrated 802.11b/g/n WiFi 2.4GHz transceiver.
SKU: R150538
