Battery Chargers and Accessories
Showing 49–96 of 1041 results
-
-
Battery Pack Accessories & Holders
20MM CR2032 Battery Button Cell Holder-2Pcs.
SKU: 10704720MM CR2032 Battery Button Cell Holder is surface and through-hole-mount battery holders are a smart choice for cost-sensitive, space-constrained applications involving computers, remote controls, and other compact electronics.
SKU: 107047 -
Battery Harness
9v Battery Snap Connector + DC Jack(Battery Connector Cap) – 2pcs
SKU: 28684- Excellent material
- It is an environmental 9V battery buckle
- The Cable Length: 10cm Approx.
- Convenient for connecting a battery to your application.
- Save power and protect the environment
- Good electrical conductivity and comfortable sense of touch
SKU: 28684 -
3S Li-ion BMS
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
3S Li-ion BMS3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
SKU: 223554- 3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 20A
SKU: 223554 -
Battery Pack Accessories & Holders
18650 1×1 Single Battery Cell Spacer/Holder
SKU: 130308- Model: 18650 radiating battery spacer
- Material: ABS/PC (Remarkable Flame Retardant Plastic)
- Dimension: 20 x 20 x 8 mm (LxWxH) (without lock slots)
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 130308 -
-
Battery Connector
HXT 4mm Gold Connector with Protector – AM-1009L.G.R
SKU: 2940This is a great way to avoid power shorts. Use these to keep your connections safe and looking neat! It is an excellent replacement for Deans T-connectors. Good for wire up to 10AWG thickness. Easier to solder and a stronger connection than Deans T-plugs
SKU: 2940 -
-
-
-
-
1S Li-ion BMS
1S 18650 Li-ion Lithium Battery BMS Charger Protection Board for 3.7V Battery.
SKU: 330131- High accuracy voltage detection circuit;
- Using high voltage device charging terminal;
- The built-in three-stage overcurrent detection circuit (overcurrent 1, overcurrent 2, load short circuit);
- The battery charge and discharge can control the MOS transistor;
SKU: 330131 -
-
Battery Connector
T Type 9V Battery, Clips Connector, Buckle with Alligator, Clips – Pack of 2
SKU: 1121432- Excellent material
- It is an environmental 9V battery buckle
- The Cable Length: 12cm Approx.
- Convenient for connecting a battery to your application.
- Save power and protect the environment
- Good electrical conductivity and comfortable sense of touch
SKU: 1121432 -
-
Power Adapter and Cable, Power Cables and Accessories
AC 250V 15A IEC320 C14 Male Power Cord Inlet Socket with Fuse Holder
Power Adapter and Cable, Power Cables and AccessoriesAC 250V 15A IEC320 C14 Male Power Cord Inlet Socket with Fuse Holder
SKU: 975702- Plug Type : 3 Pin IEC320 C14
- Terminal Pin Size: 4.8×0.8mm
- Hole Center Distance: 36 mm
- Voltage/ Current : 15A, 250V AC
- Hole in Top Face Diameter: 3.5mm
- Fuse Ampere(Presupposed): 15A
SKU: 975702 -
-
Power Adapter and Cable, Power Cables and Accessories
AC 250V 15A IEC320 C14 Male Power Cord Inlet Socket
Power Adapter and Cable, Power Cables and AccessoriesAC 250V 15A IEC320 C14 Male Power Cord Inlet Socket
SKU: R182861- Plug Type : 3 Pin IEC320 C14
- Terminal Pin Size: 4.8×0.8mm
- Hole Center Distance: 36 mm
- Voltage/ Current : 15A, 250V AC
- Hole in Top Face Diameter: 3.5mm
- Fuse Ampere(Presupposed): 15A
SKU: R182861 -
Battery Chargers, Battery Charging Boards
XH-M601 12V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power
Battery Chargers, Battery Charging BoardsXH-M601 12V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power
SKU: 1121439- Power Supply Voltage:13.8-14.8V
- Relay Operating Voltage:12.4V
- Relay Disconnect Voltage:14.8V
- Voltage Tolerance:+/-0.1V
- Voltage Detection Way: DC voltmeter
SKU: 1121439 -
-
-
Battery Pack Accessories & Holders
2 x 21700 Battery Holder with 21.2MM Bore Diameter
SKU: 1187455- Model: 21700 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 21.2MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187455 -
Battery Pack Accessories & Holders
Single Hole Electrical Insulating Adhesive Mat for 18650/18350 Battery Cell Terminal Insulation – 90 Pcs
Battery Pack Accessories & HoldersSingle Hole Electrical Insulating Adhesive Mat for 18650/18350 Battery Cell Terminal Insulation – 90 Pcs
SKU: R110652- Compatibility: 18650/18500 lithium battery
- Type: Single Cell
- No. of Rings in Package: 90
- Outer Ring Diameter is 17mm
- Inner Ring Diameter is 10mm
- Thickness: 0.25mm
SKU: R110652 -
Ni-Mh | Li-po | Li-Ion Battery chargers
Tomo V6-2 Dual Usb 2 Slots Battery Intelligent Charger For AA / AAA / 18650 / 17650 / 16340 / 14500 / 10500 Batteries Black
Ni-Mh | Li-po | Li-Ion Battery chargersTomo V6-2 Dual Usb 2 Slots Battery Intelligent Charger For AA / AAA / 18650 / 17650 / 16340 / 14500 / 10500 Batteries Black
SKU: 112824As for rechargeable batteries, a battery charger is a must-have. Here is our TOMO V6-2 Dual USB 2 Slots Battery Charger! Extremely environmentally friendly and energy-saving, our battery charger is great for daily use.
Features:
- USB to Connect to the Power supply.
- Super portable, great for home or travel use.
- Indicators for Charging (Red) and Battery Full (Green).
- With two slots for two batteries charging separately.
SKU: 112824 -
Battery Pack Accessories & Holders
3 X 6 18650 Battery, Holder with 18.5MM, Bore Diameter
SKU: 1121243- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1121243 -
Battery Pack Accessories & Holders
Single Hole Electrical Insulating Adhesive Mat for 21700 Battery Cell Terminal Insulation – 96 Pcs
Battery Pack Accessories & HoldersSingle Hole Electrical Insulating Adhesive Mat for 21700 Battery Cell Terminal Insulation – 96 Pcs
SKU: R110653- Compatibility: 21700 lithium battery
- Type: Single Cell
- No. of Rings in Package: 96
- Outer Ring Diameter is 20mm
- Inner Ring Diameter is 10mm
- Thickness: 0.25mm
SKU: R110653 -
-
Battery Pack Accessories & Holders
Single Hole Electrical Insulating Adhesive Mat for 26650/26700 Battery Cell Terminal Insulation – 70 Pcs
Battery Pack Accessories & HoldersSingle Hole Electrical Insulating Adhesive Mat for 26650/26700 Battery Cell Terminal Insulation – 70 Pcs
SKU: R110654- Compatibility: 26650/26700 lithium battery
- Type: Single Cell
- No. of Rings in Package: 70
- Outer Ring Diameter is 25mm
- Inner Ring Diameter is 15mm
- Thickness: 0.25mm
SKU: R110654 -
-
Battery Chargers, Battery Charging Boards
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
Battery Chargers, Battery Charging BoardsDual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
SKU: 62261- 4-level LED lamp display power, not working state intelligent automatic shutdown.
- Dual USB output ports.
- Input port: MicroUSB (Andro).
- Output port: USB.
- Output parameters: 5V1A / 5V2A.
SKU: 62261 -
-
