HANTEK 2C42 Handheld Oscilloscope – 40MHz ; 2CH+DMM ; 250MSa/s(Single-channel), 125MSa/s(Dual-channel)

HANTEK 2C42 Handheld Oscilloscope is compact and lightweight concept but with a new generation of 3 in 1 multifunction tester: oscilloscope, signal source and multimeter; A small volume of the non-profit grip by a single hand; The suspendingstand was designed to support multi-angle adjustment; Ultra-low-power, Type C charging interface, each 2 hours battery charge allow working one full day or standbytwo months; High-definition color LCD screen display clear and delicate; Minimalist keyboard design simplifyoperation, easy to use.

Features:

1. Oscilloscope + Waveform Generator + Multimeter: This multi-purpose station own three universal test instrument functions. It is outgoing right-hand product for engineers.
2. Intelligent charging control: Its lithium batteries can be recharged byeither high current-5V/2A or ordinary computer USB interface. Allow while charging, while using, very convenient and handy.
3. Ultra-low power design: Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months.
4. Large-capacity lithium battery power supply: 18650 replaceable lithium battery power system, free from replace battery.
5. 5V/2A charger + Type C charging cable: Type C power + data transfer interface, can share the charger and data cable with your mobile phone.
6. AUTO one-key test: Magic tool and essential function for test newbie.
7. Volume small, one hand holding: The 45 degree suspension bracket design provide you a work station anywhere anytime;One key page out, quick compare two groups of reference waveforms + 6 groups of waveforms storage, simple and effective.
8. Digital voltmeter function: automatic frequency and amplitude measurement, convenient and worry-free.Its cursor measurement functionsupports time and voltage manual measurement, and measure the required waveforms accurately.One-click switching its Chinese and English language menu.
9. Color LCD screen: exquisite and smooth lines make the waveforms clear and undistorted when magnify.Minimalist keyboard design simplify operation, convenient to use.
10. Unibody casing: fine touch feeling, favorable impact resistance, outstanding heat resistance, easy to disassemble.
11. Self-calibration function: free from level drift after long time unused.Universal multimeter function: voltage, current, resistance, diode, capacitor, on-off test.
12. Waveform generator output function: output sine, square, triangle, trapezoidal and other waveforms. sine up to 25MHz.
13. Function of video help:scan code on back of machine to get help of video course.The PC software supports windows7/8/10 32-bit and 64-bit.

Specifications:

1. Vertical Resolution: 8-bit
2. Channel: 2CH+DMM
3. VOLTS/DIV Range: 10mV/div to 10V/div at input BNC
4. Bandwidth Limit (typical): 40MHz
5. Low Frequency Response (-3db): ≤10Hz at BNC
6. Rise Time (typical): ≤5ns at BNC
7. DC Gain Accuracy: ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
8. Acquisition Modes: Normal
9. Trigger Type: Edge
10. Trigger Mode: Auto, Normal, Single
11. Trigger Level Accuracy: 0.2div X volts/div within ±4 divisions from center of screen
    Slope: Rising, Falling, Rising & Falling
12. Trigger Source: CH1/CH2
13. Input Coupling: DC, AC, or GND
14. Input Impedance (DC coupled): 25pF±3 pF, 1MΩ±2%
15. Probe Attenuation: 1X, 10X
16. Supported Probe Attenuation Factors: 1X, 10X, 100X, 1000X
17. Maximum Input Voltage: 150VRMS
18. Automatic Measurements: Frequency, Amplitude

Package Includes:

1 x Probe
1 x Clip Probe
1 x Type Charging Cable
1 x Power Adapter
1 x Multimeter Probe
1 x Replaceable Test Wires
1 x Probe set
2 x 18650 batteries